The edge processing takes place after the basic workpiece shape has been cut. By means of our edge banding machine we have the possibility to provide a 0 joint on the workpiece. This processing technique prevents the occurrence of excess traces of glue on the edge and a nice soft transition of the workpiece edges is guaranteed. The edge banding machine uses the Airtec process for edge finishing. The edge material is pressed against the wood by means of air pressure and welded.
Furthermore, in the Airtec finishing process, the workpieces are milled off by the thickness of the edge material in the joining process and provided with the Airtec edge in the continuous process. In the next five work steps of the edge banding machine, the excess edge material is removed until the perfect surface finish is achieved.